3D Cookie Cutters Using the Silhouette Alta

This site includes affiliate links. If you purchase from these links you will not pay more for the product, but I may earn a small commission which helps defray the costs of keeping the site running. I am also a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for me to earn commissions by linking to Amazon.com and affiliated sites. I appreciate your support!

Like what you see? Share it!

Last week I shared with you how our Creative Cutters group recently went a little “cookie crazy”. We had so much fun baking and decorating cookies and making cookie boxes to take the cookies home! But I got to have even more fun before the meeting, making 3D cookie cutters using the Silhouette Alta 3D printer. Today I’m going to share with you exactly how I created them!

I’m very new to 3-D printing and found cookie cutters to be a perfect beginner-level project. The design process is fairly simple and they are a great way to get to know your Alta better.

What You’ll Need:

This tutorial assumes that you’ve already set up your Alta 3D printer and know the basics of loading and unloading filament as well as how to remove your prints. If you need help getting started, be sure to check out Kelly Wayment’s 3D Printing Basics Class with the Silhouette Alta. It’s free and chock-full of helpful information about the Silhouette 3D software and the Silhouette Alta.

Step 1: Create a Basic (2D) Design in Silhouette Studio

Open a new design page in Silhouette Studio. If you want to see your design in the virtual Alta workspace, select Alta as your machine in the Page Setup Panel. Otherwise, use the Cameo or Portrait workspace.

Silhouette Studio Alta Setup

Use the drawing tools or Flexishapes to draw a basic design. In this example, I’m using the star Flexishape and I increased the points to 7.

Cookie Cutter Base - Silhouette Studio

Adjust the size of the shape to the size of the cookie cutter you want to create. I’ve chosen to make mine 2.5 inches. (The size can also be adjusted in Silhouette 3D but I found that it’s better to create the correct size from the beginning to keep the width of the 3D printed cutter wall consistent. More about that later!)

Cookie Cutter Base - Silhouette Studio

Create an offset of 0.05 inch (or 1.2 mm if you’re using the metric system).

Select both the original shape and the offset and make a compound path. Fill with color. This will create the cutter wall.

Compound Path Star - Silhouette Studio

Select the compound path and create another offset of 0.1 inch (2.5 mm). Fill the offset with a different color than the one you used for the cutter wall. This will create a handle for the cutter.

Cookie Cutter Shape + Base - Silhouette Studio

Group the two parts together and save the design to your Silhouette Library or computer hard drive as a .studio3 file.

Step 2: Create the 3D Cookie Cutter in Silhouette 3D

Open Silhouette 3D and import the .studio3 file as an Extrusion.

Import as Extrusion in Silhouette 3D

Ungroup the two sections. With the aspect ratio unlocked, select the handle (base) and set the height to 0.16 inches (4.0 mm) Level to Bed.

Resizing images in Silhouette 3D

Select the cutter wall and set the height to 0.67 inches (17.0 mm) Level to Bed.

Resizing images in Silhouette 3D

To re-align the two pieces, select each one individually and choose Center Selection on Print Bed. Once they are aligned, select both and group them back together. (Tip: Use CTRL/CMD + A to Select All, then group.)

Center Selection on Print Bed in Silhouette 3D

Make sure your platform is ready for printing and the filament is loaded, then send the file to print. I prefer to print in Standard quality because it results in a more sturdy cookie cutter.

3D image after slicing in Silhouette 3D

When printing is complete, allow the cutter to cool and carefully remove it from the platform. Your 3D cookie cutter is complete!

Like what you see here? Share the image below to Pinterest!

Once I got started making these cookie cutters, I didn’t want to stop! Besides the star, I made a butterfly, a heart, a flower, and a scalloped-edge square – each of them from a Flexishape. Next I want to try making some personalized ones for my grandkids and a small set to use with play dough. Like I said – now that I’ve started, I don’t want to stop!

Are you an Alta user? If so, what are some of your favorite 3D projects? Drop a comment below or come join me in the Silhouette Crafters by Design Facebook group to share some ideas!

Until next time,

Like what you see? Share it!

Leave a Reply

Your email address will not be published. Required fields are marked *